If you have a fire or water emergency, please call us now at (270) 894-4100

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

When to switch smoke alarm batteries

9/6/2024 (Permalink)

Smoke alarm and batteries graphic with text overlay that reads Swap and test the batteries in your smoke alarm with fine prin Swap and test the batteries in your smoke alarm twice a year.

To ensure your smoke alarm is up to date and functions properly, it’s advised to replace the batteries twice a year. An easy way to remember when to switch is when the clocks change during daylight savings time and daylight standard time, or during Spring and Fall.

How to switch smoke alarm batteries:

  • Gently twist or remove the detector from the base that its attached to by turning counter clockwise, and open the cover
  • Take the old battery out – contact your local environmental agency or department of health for updated regulations about disposal methods
  • Replace with a brand-new battery (most detectors use 9V batteries)
  • Reattach the detector to its base by turning clockwise

This may be a good time to test that the smoke alarm works! Majority of smoke alarms have a “Test” or “Push” button to test it its sound.

  • If yours doesn’t have the test button capability, you can test it by lighting two matches and holding them under the alarm
  • If yours doesn’t work, replace the device!

The earlier a fire is detected, the less overall damage it may have on your property. Smoke alarms save lives! Remember to switch and test yours twice a year.

SERVPRO of Henderson, Warrick, Union, McLean and Crittenden is equipped to make smoke and fire damage “like it never even happened”! Trust us to make your house home again after suffering a fire damage.

Other News

View Recent Posts